Scatter to Rawprogram Converter : MTK to UFS Made Simple

Scatter to Rawprogram Converter by AR Education

Introduction: A New Way to Handle MTK Firmware

Have you ever faced this situation? You have a MediaTek firmware with a scatter file, but your EasyJTAG UFS setup needs Rawprogram XML files to work. Until now, you had two options - either manually convert each partition entry (which takes hours and leads to mistakes) or find another firmware package (which might not be available).

AR Education has now released a free tool that solves this problem completely. The Scatter to Rawprogram Converter takes your MTK scatter file and automatically creates the Rawprogram XML files that your UFS flashing workflow needs. No manual calculations, no copy-pasting partition details, and no worrying about making mistakes in sector addresses.

This is particularly helpful if you work with many different MediaTek devices and don't want to spend extra time preparing files for each one.

Scatter to Rawprogram Converter by AR Education

What Exactly Does This Tool Do?

Think of this converter as a translator between two different "languages" of firmware flashing. MediaTek devices use scatter files to describe how firmware should be written - these contain partition names, where each partition should go on the storage, and how big each partition is.

On the other hand, UFS programming tools like EasyJTAG use a different format called Rawprogram XML to understand the same information. The Scatter to Rawprogram Converter reads the MTK scatter file "language" and writes it in the Rawprogram XML "language" that your UFS tool can understand.

The interesting part is that it doesn't just create one XML file - it generates three different Rawprogram XML files plus a GPT (GUID Partition Table) file, all from a single scatter file input. This gives you flexibility in how you approach the flashing process.

Key Features That Make This Tool Stand Out

Automatic Conversion: Just select your scatter file and let the tool do all the hard work - no manual entry needed
Three XML Outputs: Creates three different Rawprogram XML files in one go, giving you options for different flashing scenarios
GPT Generation: Automatically creates the partition table file needed for UFS storage
Smart Calculations: Handles partition size calculations and EMI checks without you having to crunch numbers
Error Logging: If something goes wrong, the tool creates logs to help you figure out what happened
EasyJTAG Ready: Output files work directly with EasyJTAG UFS or similar tools
No Cost: Completely free for technicians and repair professionals
Simple Interface: Even beginners can use it without watching hours of tutorials

How This Tool Changes the Game for GSM Technicians

Before this tool existed, converting scatter files to Rawprogram format was a tedious process. Technicians had to open the scatter file in a text editor, understand all the partition information, then manually create XML files with the correct structure and values. One wrong number could mean a dead phone.

Now, what used to take 30-45 minutes per firmware package can be done in seconds. This means you can handle more repairs in a day, make fewer mistakes, and take on more complex jobs that require UFS flashing of MediaTek devices.

The tool is especially valuable when working with newer MediaTek devices that use UFS storage instead of the older eMMC. These devices are becoming common in mid-range phones, and having the right tool to handle their firmware conversion gives you an edge over technicians who are still doing things manually.

Getting Started: What You Need Before Using the Tool

Before downloading and using the converter, make sure you have these things ready:

The correct MediaTek scatter file - This should come from the firmware package meant for the exact device model you're working on
A Windows PC - The tool works on Windows 10 and 11
EasyJTAG UFS or similar tool - To actually use the converted files
Basic understanding of firmware flashing - This isn't a tool for complete beginners who don't understand the risks of flashing

Most importantly, always remember that flashing firmware carries risks. Keep backups of important data and partitions whenever possible.

Step-by-Step Guide: Converting Your First Scatter File

Step 1: Download and Extract the Tool

Get the tool from the download link at the bottom of this article. The download comes as a ZIP file with password protection. Use the password GSMDock.com to extract it to a folder on your computer.

Step 2: Launch the Application

Open the extracted folder and double-click the converter executable file. The tool has a simple interface with clear options.

Step 3: Select Your Scatter File

Click on the option to select your scatter file. Browse to where you have the MediaTek scatter file stored and select it. Make sure it's the correct one for your target device - using the wrong scatter file can cause serious problems.

Step 4: Start the Conversion

Click the convert button and wait for the process to complete. This usually takes just a few seconds, depending on the size and complexity of the scatter file.

Step 5: Check Your Output Files

The tool will create three Rawprogram XML files and a GPT file in the output folder. Take a moment to look at the generated files and make sure they seem reasonable before using them.

Step 6: Use with Your Flashing Tool

Open your EasyJTAG UFS or compatible tool and load the appropriate Rawprogram XML file for your flashing needs.

Step 7: Check Logs if Needed

If anything seems wrong or the conversion fails, check the log files that the tool creates. These logs will tell you exactly what happened during the conversion process.

Important Warning About GPT Files

The GPT (GUID Partition Table) file that this tool generates deserves special attention. The GPT is essentially the map of how storage is divided into partitions on the device.

Only use the generated GPT file if you specifically need to rewrite the partition table. If the device already has a working partition table, writing a new GPT can cause more problems than it solves. A wrong GPT can make the device unable to boot, unable to access storage properly, or even make it harder to recover in the future.

Think of it like this: if someone's house is already properly divided into rooms, you don't need to knock down all the walls and rebuild them unless there's something specifically wrong with the current layout.

Real-World Example: Fixing a Bootloop on a MediaTek UFS Device

Let me share a situation where this tool really shines. Imagine a customer brings in a Xiaomi Redmi Note 11 Pro that's stuck in a bootloop. You've identified that it's a software issue and need to reflash the firmware.

The problem? This model uses a MediaTek processor with UFS storage, and your EasyJTAG UFS box needs Rawprogram XML files, but the firmware you downloaded only contains a scatter file.

Before this tool existed, you would either have to:

Manually convert the scatter file (taking 30-45 minutes and risking errors)
Search for alternative firmware that already includes Rawprogram files (which might not be available)
Turn away the customer because you couldn't handle the job

With the Scatter to Rawprogram Converter, you simply:

Extract the firmware package on your PC
Run the converter and select the scatter file
Wait a few seconds for the conversion to complete
Load the generated Rawprogram XML file into your EasyJTAG UFS
Flash the device (carefully avoiding the GPT since the partition table is fine)
Have the customer's phone working again in less than an hour

This kind of efficiency makes you look professional to customers and allows you to take on more complex repairs.

Version Comparison: Manual Conversion vs. This Tool

Since this appears to be a first release of the tool, let's compare the old manual method with this new automated approach:

Aspect	Manual Conversion	Scatter to Rawprogram Converter
Time required	30–45 minutes per firmware	10–20 seconds per firmware
Error risk	High — human errors in addresses and sizes	Low — automated calculations
XML structure	Must be created from scratch	Automatically formatted correctly
GPT creation	Complex manual process	Automatically generated
EMI checks	Often forgotten or done separately	Built into the conversion process
Learning curve	Requires deep technical knowledge	Simple point-and-click operation
Consistency	Varies with technician’s attention level	Same high quality every time

The difference is like comparing writing a letter by hand versus using a printer - both can get the job done, but one is faster, more consistent, and less prone to errors.

Common Issues and How to Fix Them

Even with a simple tool like this, you might run into some problems. Here are the most common issues and their solutions:

"Conversion failed" error

Make sure you selected a valid MediaTek scatter file
Check if the scatter file is corrupted or incomplete
Try a different scatter file from the same firmware package

Generated XML files look wrong

Verify you selected the correct scatter file for your device model
Compare the partition information in the XML with what's in the scatter file
Remember that some variations are normal based on the scatter file structure

EasyJTAG doesn't recognize the XML files

Ensure you're using the latest version of EasyJTAG UFS
Try a different of the three generated XML files
Check if your EasyJTAG requires additional configuration for this specific device

Device doesn't boot after flashing

This is usually not a converter issue but a flashing issue
Verify you used the correct firmware for the exact device model
Check if there were any errors during the flashing process
Make sure you didn't accidentally write the GPT when it wasn't needed

Frequently Asked Questions

Is this tool completely free to use?

Yes, AR Education has released this tool completely free for the GSM repair community. There are no hidden charges or premium versions.

Does it work with all MediaTek scatter files?

It works with standard MediaTek scatter files used in most MTK devices. However, extremely new or unusual scatter formats might not be fully supported.

Can I use the converted files with tools other than EasyJTAG UFS?

The generated Rawprogram XML files follow standard formats, so they should work with other UFS programming tools that accept this format. However, they're specifically tested with EasyJTAG UFS.

Why does it create three different XML files?

Different flashing scenarios might require slightly different XML configurations. Having three options gives you flexibility without needing to modify the files manually.

Do I always need to flash the GPT file?

No! Only flash the GPT if you specifically need to recreate the partition table. In most cases, you should only use the Rawprogram XML files and skip the GPT.

What if the conversion seems to work but flashing fails?

This usually indicates a mismatch between the firmware and device, not a problem with the converter. Double-check that you have the correct firmware for your exact device model and variant.

Can I convert scatter files from older MediaTek devices?

The tool should work with older MTK scatter files as well, but it's primarily designed for devices using UFS storage rather than older eMMC storage.

Is there a risk of damaging my device with the converted files?

Any firmware flashing carries some risk. However, if you use the correct scatter file for your device and follow proper flashing procedures, the risk is minimal. The biggest danger comes from incorrectly using the GPT file.

Final Thoughts

The Scatter to Rawprogram Converter by AR Education fills an important gap in the GSM technician's toolkit. By automating the conversion between MediaTek scatter files and Rawprogram XML format, it saves time, reduces errors, and makes UFS flashing of MediaTek devices accessible to more technicians.

While the tool is simple to use, remember that firmware flashing always carries risks. Always use the correct firmware for your device, keep backups when possible, and think twice before writing GPT files to devices with working partition tables.

If you regularly work with MediaTek devices that use UFS storage, this tool deserves a permanent place in your repair toolkit. It's the kind of utility that you didn't know you needed until you try it - and then wonder how you managed without it.

Download Scatter to Rawprogram Converter

Tool: Scatter to Rawprogram Converter by AR Education
Password: GSMDock.com
Developer: AR Education
Size: Small utility (exact29.7MB)

Download "Scatter to Rawprogram Converter"

Disclaimer: This tool is provided for educational and professional GSM repair purposes only. Flashing firmware carries risks including data loss and device damage. Always use correct firmware files, maintain backups, and follow proper procedures.