Samsung PIT to Qualcomm XML Tool Download 2026

Samsung PIT to Qualcomm XML Tool Latest Version Download 2026

Samsung firmware usually arrives in the familiar BL, AP, CP and CSC package format, which works fine with Odin but not with Qualcomm Emergency Download (EDL) flashing. When a Samsung handset powered by a Qualcomm chipset sits dead in EDL mode, technicians need rawprogram XML files and a Firehose loader instead. This is exactly the gap Samsung PIT to Qualcomm XML Tool fills.

The tool converts Samsung firmware partition information into Qualcomm XML format, taking input from Samsung firmware packages, GPT dumps and PIT files. Alongside the conversion, it can extract and decompress firmware components, and it includes a Flash Device section for UFS and eMMC memory types.

In this article, we cover the tool's features, how the conversion actually works, installation steps, its limitations, a practical use case, and answers to common questions.

Samsung PIT to Qualcomm XML Tool Latest Version Download 2026

Samsung PIT to Qualcomm XML Tool Download 2026

What's New in Samsung PIT to Qualcomm XML Tool

The developer has not published a version number or a changelog with the current build, so the exact release version is Not specified.

Based on the available information, the current build offers three working sections:

Convert to XML – builds Qualcomm XML from Samsung firmware, PIT and GPT data
Extract All – pulls out BL, AP, CP and CSC files and decompresses them, including LZ4
Flash Device – handles flashing with UFS and eMMC memory options

Key Features

Samsung firmware to Qualcomm XML conversion – The tool reads partition information from Samsung firmware and converts it into XML files that Qualcomm flashing tools can understand.
GPT dump support – A GPT dump taken from the device, or from an existing dump, can be used during the XML conversion instead of relying only on firmware data.
PIT file support for accurate partition names – Loading a PIT file ensures the partition names in the output XML match the device's actual partition table rather than approximations.
BL, AP, CP and CSC extraction – The Extract All section pulls out the individual firmware components from a Samsung package.
LZ4 decompression – Extracted firmware files, including LZ4-compressed images, are decompressed so they are ready for flashing.
Partition addresses and names in the XML – The generated XML carries the partition start addresses and names taken from the firmware information.
Flash Device section with UFS and eMMC options – Users can select the correct memory type before working with a device, since sector layout differs between the two.
Firehose loader support – The tool works alongside the standard Qualcomm flashing executables, namely QSaharaServer.exe and fh_loader.exe.
rawprogram XML compatibility – Output works with rawprogram XML files and extracted firmware folders, which fits the standard Qualcomm repair workflow.
Fixed 4096-byte sector size – The tool uses a sector size of 4096 bytes when calculating partition addresses.

Supported Devices / Platforms

Only confirmed details are listed below. Anything not stated by the developer is marked as not specified.

Detail	Information
Tool Name	Samsung PIT to Qualcomm XML Tool
Developer	Hozaifa PS (as shown in the software)
Version	Not specified
Operating System	Not officially specified; however, the tool references `QSaharaServer.exe` and `fh_loader.exe`, indicating a Windows environment
Memory Types	UFS and eMMC (shown in the Flash Device section)
Firmware Input	Samsung BL, AP, CP, CSC packages, PIT files, and GPT dumps
Supported Chipset Models	Not specified

Since the developer has not listed specific Samsung models or chipset generations, users should confirm compatibility with their particular device before relying on the tool.

How Samsung PIT to Qualcomm XML Tool Works

The workflow sits between two ecosystems that normally do not talk to each other.

First, the tool gathers partition information from one or more input sources: a Samsung firmware package, a PIT file, or a GPT dump taken from the device itself. The PIT file supplies accurate partition names, while the GPT dump contributes the real on-device partition layout.

Next, the tool maps this information into Qualcomm XML format. It writes partition names and start addresses into the XML using a 4096-byte sector size, which produces output in the same style as rawprogram XML files used by Qualcomm flashing tools.

Finally, during the flashing stage, the tool's Flash Device section works with a Firehose loader through QSaharaServer.exe and fh_loader.exe. These executables push the extracted firmware images to the device according to the addresses defined in the XML.

How to Use Samsung PIT to Qualcomm XML Tool

The developer's documented steps are short and straightforward:

Download the tool file from the source link.
Extract the downloaded archive if it comes in a compressed format.
Open the extracted tool folder.
Run the tool application.
Use the Convert to XML, Flash Device or Extract All section depending on the task.

There is no official step-by-step documentation for each section beyond this, so the practical details of configuring a conversion or a flash session are left to the user's familiarity with Qualcomm flashing workflows.

Benefits and Limitations

Benefits

Bridges Samsung firmware data and Qualcomm flashing tools in one place
Reduces manual work of writing rawprogram XML entries by hand
PIT and GPT inputs help produce partition names and addresses that match the device
Firmware extraction and LZ4 decompression happen in the same application
Works with established Qualcomm executables (QSaharaServer.exe and fh_loader.exe) that technicians already know
Separate UFS and eMMC options reduce the chance of memory-type mistakes

Limitations

No version number or changelog has been published, so tracking updates is difficult
Supported Samsung models and chipsets are not specified anywhere in the documentation
No official per-section user guide is available
The operating system requirement is only implied through the Windows executables, not officially stated
The tool assumes the user already understands EDL flashing, Firehose loaders and XML structure

Real-World Use Case

Consider a common repair-shop scenario. A Samsung Qualcomm device arrives completely dead. It connects to the PC only in Qualcomm HS-USB QDLoader 9008 mode, and Odin refuses to detect it. The technician has the correct stock firmware but no way to push it through Odin.

With Samsung PIT to Qualcomm XML Tool, the workflow changes. The technician extracts the BL, AP, CP and CSC files from the firmware, decompresses the LZ4 images, and loads the device's PIT file or a GPT dump to get accurate partition names. The tool then generates rawprogram-style XML with the right partition addresses. Paired with a matching Firehose loader, the technician can flash the firmware through the Qualcomm toolchain and attempt to revive the handset.

Safety / Important Notes

Back up before flashing. Any flash through EDL with a Firehose loader can erase userdata. There is no recovery once the wrong partition is written.
Use the correct Firehose loader. Loaders are chipset-specific. Pairing a device with the wrong loader can leave it permanently unresponsive.
Verify the XML before flashing. Incorrect partition addresses in a rawprogram file can write images to the wrong locations.
Confirm memory type. UFS and eMMC devices have different layouts, so the Flash Device selection matters.
Download from a trusted source. Since no official website details were supplied, make sure the copy you download comes from the developer's genuine channel and scan the archive before running it.

Frequently Asked Questions

What is Samsung PIT to Qualcomm XML Tool used for?

It converts Samsung firmware partition information into Qualcomm XML files, which allows Samsung firmware to be flashed through Qualcomm EDL tools with a Firehose loader.

Who developed the tool?

The developer shown in the software is Hozaifa PS.

Does the tool support both UFS and eMMC devices?

Yes. The Flash Device section includes separate options for UFS and eMMC memory types.

Why is a PIT file needed for the conversion?

A PIT file contains the device's partition table, so loading it helps the tool produce accurate partition names in the output XML.

Can the tool extract BL, AP, CP and CSC files?

Yes. The Extract All section pulls out these components from Samsung firmware and decompresses them, including LZ4-compressed files.

Which Qualcomm executables does it work with?

The tool supports Firehose loader workflows using QSaharaServer.exe and fh_loader.exe.

Which Samsung models are supported?

The developer has not published a list of supported models, so this is not specified.

Is the tool free to download?

Pricing information was not included in the available details, so it is not specified.

Conclusion

Samsung PIT to Qualcomm XML Tool addresses a narrow but frequent problem in Samsung Qualcomm repairs: turning Odin-format firmware into something the Qualcomm EDL toolchain can actually use. The combination of PIT and GPT inputs, LZ4 decompression and UFS/eMMC flashing options makes the workflow practical for technicians who already understand EDL flashing. Its main weakness is the lack of published documentation on versions, supported models and per-section usage, so users should test carefully and confirm compatibility before flashing any device.

Samsung firmware to Qualcomm XML converter
rawprogram XML Samsung
Samsung PIT file converter
Qualcomm Firehose flashing tool
Samsung firmware extraction tool

Download Samsung PIT to Qualcomm XML Tool

Samsung PIT to Qualcomm XML Tool